Rotary Drum Debarking Machine can finish the debarking job of the resting wood from the cutting of forest, logs with branches, twisted wood. It is suitable to debark the fresh conifer wood and parts of broad-leaved wood, and the debarking of parts of frozen and dry wood.

The working theory of these series Debarker Machine is batching dried debarking; Its structure and feature are on the world advanced level which is made up of Knives Shaft, Drum, Feeding Baffle, Discharging Baffle, Electrical Control Cabinet and Transmission Device. These machines have the special dried debarking knives on the inner of the Drum; There is the high-speed knives shaft in the middle of Drum. So the operators don't need to add water when debarking, there is no pollution.

Features: 1. Long life; 2. Less problem; 3. Simple maintain; 4. Good debarking quality; 5. High efficiency.

The diameter scope of debarking is 150-4000mm.

The biggest shortage can't realize the auto-feeding and auto-discharging. It is batch feeding and discharging. The operator will need to feed the logs into the Drum by hand, and then start the machine, after 30 minutes to stop the machine and discharge the debarked logs from the Drum by hand. The batch time is 30 minutes for each group of debarking job.

Specification of MB-G-30-20:

Size of Drum: Diameter 2000 * (L) 3000mm;

Diameter Scope of Feeding Logs: 30-3000mm

Length Scope of Feeding Logs: 2000-3000mm

Power: 15kw

The twisted degree of Feeding Logs < 8%

The burl height of Feeing Logs < 80mm

Debarking Efficiency: > 90%

Net weight: 3.2 ton

Capacity: 3-5 ton/1hour which each loading group is 1.5-2.5ton/1hour, 30 minutes for 1 group.

Considering the barks from Rotary Drum Debarking Machine is not mass, so it is difficult to match the Conveyor for the transportation of Barks.